Self-drilling Screw
A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation.
- Thread Size: #4 to 1/4 (M2.9 to M6.3)
- Length: 3/8" to 12" (9.5 to 300mm)
- Point: Drill Point #2, #3, #4, #5
- Finish: Phosphate (grey or black), Zinc Plated (clear / white / yellow), Coating (Geomet, Dacrotized, Ruspert etc.), Mechanically Zinc plating etc.
- Standard: IFI, DIN7504, JIS, BS, AS, EN14566 or customized designs available.
- Material: Carbon Steel, Stainless Steel
Recess Type
Head Type
Thread Type
DIN7504 | Self drilling screws | Tek screw flat head cross recess zincplating
A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation.
DIN7504 | Self drilling screws | Tek screw hex washer head zincplating
A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation.
DIN7504 | Self drilling screws | Tek screw pan head serration under head zincplating
A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation.
DIN7504 | Self drilling screw | Tek screw button head zincplating
A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation.
DIN7504 | Self drilling screws | Tek screw with wings flat head with nibs TORX
A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation.